Phone:
+86-13385228080
English 
Disposable gown
Fabric:PP/SMS/PP+PE/CPE
Features：
• Strong and durable, resistant to tearing and abrasion, comfortable to wear, soft, light, breathable, lint-free, and anti-pollution.
• It can permeate air and water vapor but can repel water-based liquids and aerosols.
• Made of high-density polyethylene, without fillers, adhesives, and latex-free.
• The surface is smooth and repels inorganic liquids prevents chemical substances from splashing, and at the same time makes solid dust difficult to adhere to.
• Special coating treatment, dust-proof performance can effectively prevent harmful ultrafine dust, high concentrations of inorganic acid, alkali, and salt solution.
Performance levels：protection against light liquids and dusts.
Disposable coverall with Silver Reflective Hi-Vis Tape
Fabric: SMS polypropylene
Features：
•Multi layers SMS fabric improves fabric strength and filtration and makes the coverall more durable.
•Passes EN1149-5 for the antistatic property.
•Passes EN 1073-2 for protection against radioactive particulate contamination.
•Low linting to help reduce the risk of cross-contamination in critical areas
•2030-5 Silver reflective Hi-Vis tape for enhanced visibility.
Performance levels：
| EN ISO 13982-1 | Type 5 | Protection against airborne solid particulates and infective agents. |
| EN 13034
| Type 6 | Limited protective performance against light spray, liquid aerosol or low pressure, low volume splashes and infective agents. |
| EN 1073-2 | Class 1 | Total Inward Leakage. |
Disposable SMS coverall
Fabric:SMS polypropylene
Features：
• Light and durable material. 3-panel hood is designed to fit when wearing a respirator and goggles.
• Optimal body fit and fully elasticated waist.
• Elasticated wrists and ankles to keep particulates out.
• Optimized Body Fit Improves wearer comfort and safety, reduces the risk of seams splitting when bending, sitting, or crawling.
• Air and water vapor permeable to help reduce the risk of heat stress.
Performance levels：
| EN 1149-5:2018 |
| Protective clothing – Electrostatic properties – Part 5; Material performance and design requirements. |
| EN ISO 13982-1 | Type 5 | Protection against airborne solid particulates and infective agents. |
| EN 13034
| Type 6
| Limited protective performance against light spray, liquid aerosol or low pressure, low volume splashes and infective agents. |
| EN 1073-2 | Class 1 | Total Inward Leakage. |
Type 5/6 Disposable protective coverall
Fabric: polypropylene + polyethylene film
Features：
•Microporous film fabric improves fabric strength and filtration and makes the coverall more durable.
• Light and durable material. 3-panel hood is designed to fit when wearing a respirator and goggles.
• Optimal body fit and fully elasticated waist.
• Elasticated wrists and ankles to keep particulates out.
• Optimized Body Fit Improves wearer comfort and safety, reduces the risk of seams splitting when bending, sitting, or crawling.
• Air and Moisture vapor permeable to help reduce the risk of heat stress.
Performance levels：
| EN 1149-5:2018 |
| Protective clothing – Electrostatic properties – Part 5; Material performance and design requirements. |
| EN ISO 13982-1 | Type 5B | Protection against airborne solid particulates and infective agents. |
| EN 13034
| Type 6B
| Limited protective performance against light spray, liquid aerosol or low pressure, low volume splashes and infective agents. |
| EN 1073-2 | Class 2 | Total Inward Leakage. |
| EN 14126
| Class 3 | Resistance to penetration by contaminated liquids under hydrostatic pressure. |
| Class 2
| Resistance to penetration by infective agents due to mechanical contact with substances containing contaminated liquids. | |
| Class 1 | Resistance to penetration by contaminated liquid aerosols. | |
| Class 2 | Resistance to penetration by contaminated solid particles. |
Disposable coverall with taped seam
Fabric: polypropylene + polyethylene film
Features：
• Made from a soft lightweight fabric with taped seams, providing a very good barrier to hazardous particles and liquid splash and spray.
• Chemical liquid(EN368)and blood(ASTM F1670) penetration resistance for premium protection.
• Passes EN14126 for protection against biological hazards and infective agents ( TYPE 4-B, 5-B, 6-B).
• Low linting to reduce the risk of contamination in environment.
• Reaches class 6/6 of ISO 16603 for resistance of penetration by blood and body fluids (Synthetic blood).
• Reaches class 2/6 of ISO 16604 for resistance of penetration by blood-borne pathogens.
Performance levels：
| EN 14605 | Type 4B | Protective performance against spray and infective agents. |
| EN ISO 13982-1 | Type 5B | Protection against airborne solid particulates and infective agents. |
| EN 13034
| Type 6B
| Limited protective performance against light spray, liquid aerosol or low pressure, low volume splashes and infective agents. |
| EN 1073-2 | Class 3 | Total Inward Leakage. |
| EN 14126
| Class 6 | Resistance to penetration by contaminated liquids under hydrostatic pressure. |
| Class 6 | Resistance to penetration by infective agents due to mechanical contact with substances containing contaminated liquids. | |
| Class 3 | Resistance to penetration by contaminated liquid aerosols. | |
| Class 3 | Resistance to penetration by contaminated solid particles. |
Type 3 Disposable protective coverall
Fabric: 100% polypropylene + polyethylene film
Features：
•Using external barrier film provides various chemical protection and dry particle proof.
•Zipper with self-adhesive double layer storm flaps provide total protection in liquid and particle barriers.
•Passes EN14126 for protection against biological hazards and infective agents (TYPE 3-B, 4-B, 5-B).
•Provides numerous chemical protection including 98% sulphuric acid, 10% formaldehyde, and ethylene glycol.
•The seams are sewn for strength and over-sealed with chemical-proof tape to ensure no penetration of liquid.
•Reaches class 6/6 of ISO 16603 for resistance of penetration by blood and body fl-fluids. Synthetic blood).
Performance levels：
| EN 14605 | Type 3B | Protection against liquid tight and infective agents. |
| Type 4B | Protective performance against spray and infective agents. | |
| EN ISO 13982-1 | Type 5B | Protection against airborne solid particulates and infective agents. |
| EN 13034
| Type 6B | Limited protective performance against light spray, liquid aerosol or low pressure, low volume splashes and infective agents. |
| EN 1073-2 | Class 2 | Total Inward Leakage. |
| EN 14126
| Class 6
| Resistance to penetration by contaminated liquids under hydrostatic pressure. |
| Class 6 | Resistance to penetration by infective agents due to mechanical contact with substances containing contaminated liquids. | |
| Class 3 | Resistance to penetration by contaminated liquid aerosols | |
| Class 3 | Resistance to penetration by contaminated solid particles |
Disposable lab coats
Fabric:PP/SMS/PP+PE/CPE
Features：
• Our disposable lab coats are made of high-quality polypropylene material which is soft, comfortable, breathable, and lightweight!
• Humanized Design.Every detail of our disposable lab coats is carefully designed for use.
• Strong and Effective.Thanks for the premium-quality material, these laboratory coats offer you strong safety!
• Multipurpose.Made with non-woven material that is splash-resistant,anti-static, our polypropylene gowns are used on various occasions. Suitable for men and women.
Performance levels：protection against light liquids and dusts.
Workers in the chemical industry should choose appropriate protective equipment according to their working environment. If there are liquid substances in the workplace that can stick to the skin and clothing, and absorb through the skin to cause poison or harm to the skin, you need to wear protective clothing of Type 4 and above to prevent physical injury. If workers are exposed to productive dust for a long time, they need to wear dust masks and dust protective clothing to prevent inhalation of excessive dust and cause lung fibrous lesions.
Hospital protective clothing can prevent the penetration of water, blood, alcohol, and other liquids, and has good barrier properties to bacteria, viruses, and aerosols, and prevents the blood, body fluids, and other secretions of the patient from infecting the medical staff. The material of the protective clothing has a strong ability of tear resistance, puncture resistance, abrasion resistance, etc., to avoid tears and punctures to provide channels for the spread of bacteria and viruses, and abrasion resistance can prevent flocculation from providing bacteria and viruses for reproduction place.
Most of the drugs used in the laboratory are toxic, flammable, and corrosive. Wearing lab coats can keep us away from these dangers. Some medicines are colored and difficult to clean when stained on clothes. Wearing protective clothing can keep our clothes clean. The most important thing is that when a large amount of medicine is stained on the lab coat, it can be quickly taken off to escape the polluted environment.
The harm of paint to the human body is inevitable. The biggest harm is killing red blood cells, causing benzene poisoning, and inhalation of dust causing pneumoconiosis. HB FULLCARE FC2090 protective clothing has a higher level of protection and better physical and chemical properties of the fabric. It can prevent hazardous chemicals in paints and solvents from contacting or being absorbed by the skin. Its lightweight, sturdy, high-performance protection and accessories (gas masks, non-slip boot covers, etc.) can provide comprehensive protection for workers during painting operations.
| Name | Size | Thumbnail | Copy Link | Download |
|---|---|---|---|---|
| Body protection safety standard.doc | 42KB |  | Copy Link | Download |
